irinox ICY L, Инструкция по эксплуатации и обслуживанию

Страница: 31 / 36

31
4.2.2. Emptying condensation
The models with a built-in condensing unit are equipped
with a special tray to gather condensation and wash
water. It is at the bottom part of the appliance.
Empty and clean the tray periodically, pulling it out from
beneath the appliance using the appropriate handle.
4.3. CLEANING THE CONDENSER
For Blast chillers with built-in condensing units, access
the condenser pulling the front flapped grid with force.
For remote condensing units, the air condenser must
be kept clean to allow free air flow.
This operation, which must be carried out at least every
30 days, can be done with non-metallic brushes in
order to remove all dust and down from the condenser
flaps. It is recommended to use a vacuum cleaner to
avoid dispersing the dust in the area. Use a brush
soaked in alcohol if there are oily deposits.
Do not scrape the surfaces with sharp or abrasive
elements.
Do not use high pressure water jets
Always wear protective gloves, goggles and
masks protecting the respiratory tract for these opera-
tions.
Fig. 11