INVT GD20-004G-2-EU, Руководство по эксплуатации

Страница: 62 / 168

Goodrive20-EU series VFD Function parameters
58
Function
code
Name Detailed instruction of parameters
Default
value
Modify
34: DC brake
35: Reserved
36: Shift the command to keypad
37: Shift the command to terminals
38: Shift the command to communication
39: Pre-magnetized command
40: Clear the power consumption
41: Keep the power consumption
42: Emergency stop
43
– 60: Reserved
61: PID pole switching
62
– 63: Reserved
When terminals are used for acceleration/
deceleration time selection, the four groups of
acceleration/deceleration time are selected
based on the states of Acceleration/deceleration
time selection terminal 1 (21) and
Acceleration/deceleration time selection terminal
2 (22).
Terminal
1 (21)
Terminal
2 (22)
Acceleration or
deceleration time
Parameters
OFF OFF
Acceleration/
deceleration time 1
P00.11/
P00.12
ON OFF
Acceleration/
deceleration time 2
P08.00/
P08.01
OFF ON
Acceleration/
deceleration time 3
P08.02/
P08.03
ON ON
Acceleration/
deceleration time 4
P08.04/
P08.05
P05.10
Input terminal
polarity
selection
The function code is used to set the polarity of
the input terminals.
Set the bit to 0, the input terminal is anode.
Set the bit to 1, the input terminal is cathode.
BIT8 BIT7 BIT6 BIT5 BIT4
HDI S8 S7 S6 S5
BIT3 BIT2 BIT1 BIT0
S4 S3 S2 S1
Setting range: 0x000
– 0x1FF
0x000
○