INVT GD20-004G-2-EU, Руководство по эксплуатации

Страница: 19 / 168

Goodrive20-EU series VFD Installation guide
15
Environment Conditions
Storage
temperature
-40°C to +70°C, and the temperature changing rate is less than 1°C/minute.
Running
environment
condition
The installation site of the VFD should fulfill the following requirements.
a) Away from the electromagnetic radiation source;
b) Away from contaminative air, such as corrosive gas, oil mist and
flammable gas;
c) Foreign objects, such as metal power, dust, oil, water cannot fall into the
VFD (do not install the VFD on the flammable materials such as wood);
d) Away from direct sunlight, oil mist, steam and vibration environment.
Altitude
Below 1000m;
If the altitude is above 1000m, derate 1% for every additional 100m.
Vibration
≤ 5.8m/s 2
(0.6g)
Installation
direction
The VFD should be installed on an upright position to ensure sufficient cooling
effect.
Note:

Goodrive20-EU series VFDs should be installed in a clean and ventilated environment
according to enclosure classification.

Cooling air must be clean, free from corrosive materials and electrically conductive dust.
3.1.2 Installation direction
The VFD may be installed on the wall or in a cabinet.
The VFD needs be installed in the vertical position. Check the installation site according to the
requirements below. Refer to Appendix B "Dimension drawings" for details.
3.1.3 Installation mode
(1) Wall and rail mounting for the VFDs (single phase 230V/three phase
400V, ≤2.2KW and
three phase 230V, ≤0.75KW)
a) Wall mounting
b) Rail mounting
Figure 3-1 Installation