INVENTIA MT-101, Руководство пользователя

Страница: 85 / 165

82
FS1_ups, FS1_q+, FS1_gprs
system trigger inputs
P1...P32
user program inputs
TMR1, TMR2, TMR3, TMR4
synchronous and asynchronous clocks trigger inputs
Default
value - n/a
Comments - more about trigger inputs and flags in chapter Appendices
8.2.7.2.1.1.2. Trigger flag
Function - defines event triggering flag associated with selected trigger
input
Data type - selection list
Range - n/a
rule inactive
Bi In 0->1, Bi In 1->0 Bi In Chg
binary input state change
Bi Out Err
discrepancy between the forcing and output state
Counter
counter flip over (up or down)
An LoLo, An Lo, An Hi, An HiHi, An Set Fall, An Set Rise An DB
alarm threshold flags for analogue inputs signals
Default
value - n/a
Comments - more about trigger inputs and flags in chapter Appendices
8.2.7.2.1.1.3. IP address
Function - selects recipient's IP address
Data type - selection list
Range - friendly names of recipients associated with IP addresses in
Authorized numbers list
Default
value - IP1 - first number on the list
Comments - since recipient's IP address is selected from the list of friendly
names, it is important to enter unique, unambiguous names
facilitating identification.
8.2.7.2.1.1.4. Send
Function - defines data type sent in transmission triggered by defined
rule
Data type - List
Range - Status
Module Status will be sent
Buffer Hold. Reg.
Registers from modules' internal registers' space will be
sent. Defining the transmitted space is required.
Buffer Inp. Reg.
Registers from module input registers' space will be sent.
Defining the transmitted space is required.