Invacare Top End Everyday Series Скачать руководство пользователя | Manualshive

Страница: 17 / 78

background image

3 SAFETY

Invacare® Top End® Everyday Series

17

Part No 1171801

3 Safety

The safety section contains important information for the safe operation and use of this product.

3.1

General Guidelines



WARNING

DO NOT use this product without first completely reading and understanding these instructions and any additional instructional material
such as owner’s manuals, service manuals or instruction sheets supplied with this product. If you are unable to understand the warnings,
cautions or instructions, contact a healthcare professional, dealer or technical personnel before attempting to use this equipment -
otherwise, injury or damage may occur.
A qualified technician MUST perform the initial set up of this wheelchair. also, a qualified technician must perform all procedures specifically
indicated in the manual.



ACCESSORIES WARNINGS

Invacare products are specifically designed and manufactured for use in conjunction with Invacare accessories. Accessories designed by
other manufacturers have not been tested by Invacare and are not recommended for use with Invacare products.

!

NOTICE

THE INFORMATION CONTAINED IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.
Check all parts for shipping damage and test before using. In case of damage, DO NOT use. Contact Invacare/Carrier for further
instruction.

«
...
15
16
17
18
19
...
»

Содержание Top End Everyday Series















































































Отзывы:

Нет отзывов

Похожие инструкции для Top End Everyday Series

Бренд: C.T.M. Страницы: 22

Motion Concepts Ultra Low Maxx

Бренд: Invacare Страницы: 100

Бренд: Z-Tec Страницы: 4

Бренд: Permobil Страницы: 26

Бренд: Herdegen Страницы: 12

Бренд: Drive DeVilbiss Страницы: 2

Бренд: chinesport Страницы: 8

Бренд: chinesport Страницы: 10

Бренд: Permobil Страницы: 16

Бренд: Permobil Страницы: 20

Бренд: Vermeiren Страницы: 134

ROHO Nexus SPIRIT NS1414C

Бренд: Permobil Страницы: 72

Бренд: SORG Страницы: 36

Бренд: OFF CARR Страницы: 23

Бренд: WOLTURNUS Страницы: 36

Бренд: Preston Ability Страницы: 23

Saber GT Series

Бренд: Karma Страницы: 64

Бренд: KD Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды