Invacare Top End Everyday Series, Руководство пользователя

Страница: 69 / 78

8 FOOTREST/ANTI-TIPPER
Part No 1171801
69
Invacare® Top End® Everyday Series
8 Footrest/Anti-Tipper
8.1 Adjusting/Replacing Footrest
1. Loosen the allen screws that secure the footrest to the wheelchair
frame. If replacing the footrest, remove existing footrest.
2. Position the new or existing footrest to the desired height on the
wheelchair frame.
3. Tighten the allen screws that secure the new footrest to the
wheelchair frame.

WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise injury or
damage may occur.
ALWAYS perform this procedure in the presence of an assistant. The position of the footrest, camber tube, back angle, the tautness of
the back upholstery as well as the user's condition are directly related to the wheelchairs stability. Any change to one or any combination
of the five may cause the wheelchair to decrease in stability. Use extreme caution when using a new seating position. The addition of
anti-tippers may be required.
Check all allen screws that secure the footrest/raised footrest system to the wheelchair frame to make sure they are securely tightened
before using the wheelchair. Especially if engaging in any contact sport.
The footrest assembly MUST be at least 1-3/4-inches (4.45 cm) above the ground/floor to avoid hitting protruding objects when using this
wheelchair.
The standard footrest has an open hoop. A footplate cover is recommended for wheelchair users that have leg spasticity or whose feet
have a possibility of falling through the footrest hoop. A calf strap is provided with each wheelchair to prevent the feet from slipping
backwards off of the footrest. Be sure the calf strap is secure when using the wheelchair.
Footrest
Allen
Screws
Wheelchair
Frame