Invacare Top End Everyday Series, Руководство пользователя

Страница: 50 / 78

6 WHEELS
Invacare® Top End® Everyday Series
50
Part No 1171801
6.7 Repairing/Replacing Rear Wheel Tire/Tube
6.8 Opening/Closing Camber Clamps

WARNING
The replacement of the tire or tube MUST be performed by a qualified technician.

CAUTION
Changing the size of the rear wheels can affect the performance of the wheelchair. Contact Top End at the number on the back cover
before performing this procedure.
 If replacing rear wheels with a different size than what was originally on the wheelchair, the front caster height must also be changed to
keep the wheelchair frame parallel to the floor. Refer to Replacing/Adjusting Casters on page 65 ONLY after contacting Invacare.
Anti-tipper height (if applicable) must also be adjusted to maintain 1-1/2 to 2-inch (3.81 to 5.08 cm) clearance between bottom of the
anti-tipper wheels and the floor. Refer to Adjusting/Replacing Anti-Tipper on page 71.

WARNING
STANDARD AND SUSPENSION CAMBER CLAMPS - Make sure the hex screws are securely tightened before using wheelchair,
otherwise personal injury or damage to the wheelchair may occur.
QUICK RELEASE LEVERS - Make sure the quick release levers are in the closed position before using the wheelchair, otherwise personal
injury or damage to the wheelchair may occur.

CAUTION
ADJUSTABLE CAMBER SYSTEM only - DO NOT close the quick-release levers or tighten the socket screws or hex screws without
camber inserts in the axle tube. Damage to the axle tube will occur.