Invacare Top End Everyday Series Скачать руководство пользователя

Страница: 70 / 78

8 FOOTREST/ANTI-TIPPER

Invacare® Top End® Everyday Series

Part No 1171801

8.2

Installing/Adjusting Optional Clamp on Raised

Footrest
Installing

Install the two half clamps onto either side of the wheelchair frame

approximately 2-inches (5.08 cm) above existing footrest with two

provided allen screws.

Repeat for the opposite side of the wheelchair.

Slide the clamp on raised footrest into the half clamps to the desired

height.

Securely tighten the four allen screws.

Adjusting

Loosen the four allen screws.

Adjust clamp on raised footrest to the desired height.

Securely tighten the four allen screws.

8.3

Replacing/Adjusting Optional Adjustable Angle One

Piece Footplate
Replacing the Footrest

Loosen, but DO NOT remove the two allen screws that secure the

footrest to the wheelchair frame.

Slide the existing footrest tubes out of the wheelchair frame and install

new footrest by reversing this step.

Position the new footrest to a determined height.

Tighten the allen screws that secure the footrest to the wheelchair

frame.

Adjust the footplate to the desired position.

Adjusting Footplate Angle

Loosen, but DO NOT remove the four flat screws and locknuts that

secure the footplate to the footrest tubes.

Position the footplate to the necessary angle to accommodate the user.

Tighten the four flat screws and locknuts.

Allen

Screws

Wheelchair Frame

Outside

Footrest

Hoop

Half Clamp

Raised

Footrest

Allen Screws

Footrest

Tube

Flat Screws

Footplate

Flat Screws

Angle

Depth

Height



The
locknuts
should lie in
the channel
of the
footplate
half clamp.

Содержание Top End Everyday Series















































































Результаты поиска

Содержание Top End Everyday Series

Отзывы:

Похожие инструкции для Top End Everyday Series

Бренды по названию

Популярные бренды

Invacare Top End Everyday Series, Руководство пользователя

Результаты поиска

Содержание Top End Everyday Series

Отзывы:

Похожие инструкции для Top End Everyday Series

Бренды по названию

Популярные бренды