Invacare Top End Everyday Series Скачать руководство пользователя

Страница: 6 / 78

1 GENERAL

Invacare® Top End® Everyday Series

Part No 1171801

1 General

1.1

Symbols

Warnings

Signal words are used in this manual and apply to hazards or unsafe practices which could result in personal injury or property damage.

See the information below for definitions of the signal words.

1.2

Dealer/Technician Information

The term “qualified technician” in this manual refers to an Invacare qualified technician.



DANGER

Danger indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.



WARNING

Warning indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.



CAUTION

Caution indicates a potentially hazardous situation which, if not avoided, may result in property damage or minor injury or
both.

IMPORTANT

Indicates a hazardous situation that could result in damage to property if it is not avoided.



Gives useful tips, recommendations and information for efficient, trouble-free use.

Содержание Top End Everyday Series















































































Результаты поиска

Содержание Top End Everyday Series

Отзывы:

Похожие инструкции для Top End Everyday Series

Бренды по названию

Популярные бренды

Invacare Top End Everyday Series, Руководство пользователя

Результаты поиска

Содержание Top End Everyday Series

Отзывы:

Похожие инструкции для Top End Everyday Series

Бренды по названию

Популярные бренды