Invacare Top End Everyday Series, Руководство пользователя

Страница: 53 / 78

6 WHEELS
Part No 1171801
53
Invacare® Top End® Everyday Series
6.10 Determining Toe In/Toe Out
1. Inflate all pneumatic tyres to recommended tyre pressures (listed on the sidewall of the tire).
2. Measure the distance between the centerlines at the rear and front of the rear wheels at approximately 12 inches (30.48 cm) from the ground/floor.
3. Determine difference between two measurements. If difference between the two measurements is greater than 1/2-inch (1.27 cm) (0 + 1/4-inch (.63
cm) for maximum rollability), one of two conditions exists:
•
If the back centerline measurement of the rear wheels is SMALLER than the front centerline measurement of the rear wheels, a TOE-OUT
condition exists .
• If the back centerline measurement of the rear wheels is LARGER than the front centerline measurement of the rear wheels, a TOE-IN
condition exists.
4. If the difference between the measurements is greater than 1/2-inch (1.27 cm), correct the toe-in/toe-out condition.

For optimum accuracy, perform STEP 2 with the wheelchair occupied.
Top View of
Wheelchair
Front of Wheelchair
12-inches (30.48 cm)
Rear of
Wheelchair
Centerlines of Rear Wheels
Front of Wheelchair
Smaller than
Front
Larger than Front
Toe-out
Toe-in
Top View of
Wheelchair