Intrepid Control Systems RAD-Galaxy Скачать руководство пользователя

Страница: 67 / 104

RAD-Galaxy User’s Guide

Version 1.2 - November 28, 2017

Core Feature Operation

Now that we have completed installing and configuring our hardware and software, we are

ready to use the RAD-Galaxy. As discussed at the start of this guide, you can do a lot with this

little box, and in this chapter we show you just some of the unit’s many applications.

The goal of this chapter is specifically to assist those who are new to Intrepid hardware and

software, and so simplified examples are provided. Advanced users may wish to skim or even

skip this chapter. Note that some sections of this chapter will be written in future updates of the

manual.
Each of the sections contains an example application, step-by-step instructions for those who

wish to duplicate the results on their own device. Even if you cannot perform the operations

outlined (perhaps due to a lack of ECUs for connection to the RAD-Galaxy), you will learn

more about using your Intrepid hardware and software by reading the instructions.
The examples use Intrepid’s Vehicle Spy 3 Professional, the ideal tool for working with your

RAD-Galaxy. Due to the complexity of Vehicle Spy, we only describe the basics necessary for

the examples; for full details on this powerful software tool, please see the separate Vehicle

Spy documentation.

Note:

The Ethernet examples make use of a sample client/

server application that we created on two BroadR-Reach nodes

for demonstration purposes. Your application will be different, but

you should be able to adjust the example steps to suit any similar

client/server exchange on your own network.

Note:

The first three sections of this chapter build upon each

other and are intended to be completed in sequence.

5.1

Using the RAD-Galaxy as an Active Tap to Monitor Ethernet Traffic

Let’s start with the most common use of the RAD-Galaxy: as an active tap for Automotive

Ethernet. As mentioned earlier, the RAD-Galaxy can tap up to six pairs of BroadR-Reach

nodes, but for simplicity, we will show an example using only one.

In this sample application we have configured two BroadR-Reach devices to send messages

back and forth to emulate a client/server data exchange. The client sends a message every

100 ms that contains a single 8-bit data field with a counter that goes up by 1 on each

transmission. The server looks for these messages, and when one is received it reads the

Содержание RAD-Galaxy









































































































Результаты поиска

Содержание RAD-Galaxy

Отзывы:

Похожие инструкции для RAD-Galaxy

Бренды по названию

Популярные бренды

Intrepid Control Systems RAD-Galaxy, Руководство пользователя

Результаты поиска

Содержание RAD-Galaxy

Отзывы:

Похожие инструкции для RAD-Galaxy

Бренды по названию

Популярные бренды