Intrepid Control Systems RAD-Galaxy Скачать руководство пользователя страница 66

Страница: 66 / 104

RAD-Galaxy User’s Guide

Version 1.2 - November 28, 2017

4.8 Network Enables

This area provides more options for controlling the enabling and disabling of individual

networks within the RAD-Galaxy (Figure 69). The main display contains a scrollable list with

checkboxes that can be set or unset to enable or disable each network. These are equivalent

to the Enable checkboxes found in the parameter areas for the corresponding networks.
This list contains all of the networks supported by all Intrepid devices. By default, networks not

present on the RAD-Galaxy are disabled. In addition, the selectable networks that have been

enabled will appear as enabled here, while the disabled networks will show as disabled (see

Section 4.5).

Figure 69: neoVI Explorer Network Enable/Disable Parameters.

Enable Networks on Boot

Normally, the RAD-Galaxy will not acknowledge messages on a network unless it is online

with that network or running a CoreMini script. When this option is enabled, the device always

acknowledges frames on all enabled networks.

Enable All

Enables all networks. Pressing this button will attempt to set checkmarks for all networks; if

you use it, be sure to disable networks that should be off, so the device remains in a valid

configuration.

Disable All

Disables all networks.

Содержание RAD-Galaxy









































































































Результаты поиска

Содержание RAD-Galaxy

Отзывы:

Intrepid Control Systems RAD-Galaxy, Руководство пользователя, Страница: 66 / 104

Результаты поиска

Содержание RAD-Galaxy

Отзывы: