RAD-Galaxy User’s Guide
65
© 2016 Intrepid Control Systems, Inc.
Version 1.2 - November 28, 2017
we aren’t interested in, so let’s filter that out by using the network filter list on the left side of
Messages View
.
6. Set Network Filters:
In the left hand column, click in the boxes next to
OP (BR) ETH01
and
OP (BR) ETH02
so that a checkmark appears for each.
You should now see only the messages on RAD-Galaxy channels 1 and 2, arriving in pairs
(Figure 71).
Figure 71:
Monitoring Tapped Message Traffic in Vehicle Spy using the RAD-Galaxy.
These messages are shown in their raw form because we have no message definitions loaded
for them. We can create receive messages to decode the messages and fields, however, so
they are easier to see.
7.
Go Offline.
8. Load the Messages Editor:
Select
Messages Editor
from the
Spy Networks
menu.
9. Select RAD-Galaxy Channel 1 Network:
Select “OP (BR) ETH01” from the
on
Network
drop-down box in the blue header. (It will be near the bottom.)
