background image

RAD-Galaxy User’s Guide

51

© 2016 Intrepid Control Systems, Inc.

Version 1.2 - November 28, 2017

To manage your RAD-Galaxy, click on its entry in the navigation pane (if it is not already 

highlighted) and then press the 

Connect

 button. After successfully connecting to the device, 

you will see a “thumbs up” icon next to the device’s name, and checkmarks will appear next to 

currently-enabled networks in the explorer area on the left. You should also see a message in 

the message box on the right saying “RADGalaxy RGxxxx settings have been read”.  This tells 

you that neoVI Explorer has loaded the current settings from the unit. The information in the 

upper right-hand part of the window is device-specific and described in 

Section 4.2. The screen 

as a whole should appear similar to that shown in Figure 56 (but note that the version number 

shown at the bottom may be different).

Figure 56: Typical neoVI Explorer Window After Initial Connection to the RAD-Galaxy.

Note:

 It is possible to click on various parameter groups at any 

time, but they will not show valid data until you connect to the 

device. Remember also to connect to the device before making 

changes, or they will be erased when you do connect and the 

settings in the hardware are loaded.

Writing and Reloading Settings

To avoid potential problems, neoVI Explorer will not save any changes to device parameters 

until you instruct it to do so. This is done by pressing the 

Write Settings

 button, which will 

Содержание RAD-Galaxy









































































































Отзывы: