Intrepid Control Systems RAD-Galaxy Скачать руководство пользователя страница 21

Страница: 21 / 104

RAD-Galaxy User’s Guide

Version 1.2 - November 28, 2017

Figure 9: RAD-Galaxy Left Side View.

8-LED Status Indicator Array

These LED indicators (bottom left) are used to convey status information.

LEDs #1 and #2

One or both of the left two LEDs (which we will call #1 and #2) will always be flashing, with

their pattern indicating the mode of the device. The interpretation of the LEDs depends on

whether or not a CoreMini script (which may be a VehicleScape standalone logging script) is

present in the device. Table 1 shows the possible combinations.

LED #1

LED #2

CoreMini

Present?

Description

Off

RAD-Galaxy is powered off.

Off

Flashing

Device is offline (idle) with no CoreMini or standalone logging

script active.

Flashing

(Alternating)

Flashing

(Alternating)

Device is online (for monitoring traffic or transmitting

messages in Vehicle Spy) with no CoreMini or standalone

logging script active.

Flashing

Off

Yes

A CoreMini script (including a possible VehicleScape logging

script) is active, but logging is not taking place.

Flashing

Yes

A VehicleScape logging script is running and actively logging

data; the flash rate of LED #2 indicates how rapidly data is being

logged.

Table 1: RAD-Galaxy Red LED #1 and #2 Flash Patterns.

Содержание RAD-Galaxy









































































































Результаты поиска

Содержание RAD-Galaxy

Отзывы:

Intrepid Control Systems RAD-Galaxy, Руководство пользователя, Страница: 21 / 104

Результаты поиска

Содержание RAD-Galaxy

Отзывы: