Intrepid Control Systems RAD-Galaxy страница 5 Скачать руководство пользователя

Страница: 5 / 104

RAD-Galaxy User’s Guide

Version 1.2 - November 28, 2017

Introduction and Overview

1.1 Introduction

Thank you for purchasing an Intrepid Control Systems RAD-Galaxy multi active tap and

media converter for Automotive Ethernet (AE). The RAD-Galaxy allows you to seamlessly

monitor communications between 6 IEEE 802.3 100BASE-T1 Ethernet nodes and a switch,

or between 6 pairs of nodes. In its media converter mode, it can instead act as an interface

between 12 independent nodes or switch ports and a PC, allowing the PC to talk to all nodes

simultaneously. The RAD-Galaxy communicates at up to 1 Gb/s over its standard Gigabit

Ethernet link, and also has a second Ethernet port for Diagnostics over IP (DoIP) operations

with a connected vehicle.
In addition to its powerful Automotive Ethernet capabilities, the RAD-Galaxy can also be

used to interface with standard vehicle networks. It includes support for 8 CAN channels with

CAN FD support, 2 of which can be switched between Dual Wire CAN and Single Wire CAN.

Support for one LIN channel and multiple channels of analog and/or PWM input/output are

built into the hardware, and will be available in a future firmware update. The RAD-Galaxy can

be used either attached to a PC or as a standalone logger. It also comes with a license for the

full professional version of Intrepid’s powerful Vehicle Spy software, providing a wide range of

vehicle network analysis and simulation capabilities.

Note:

100BASE-T1 Automotive Ethernet is also known as

BroadR-Reach

(sometimes abbreviated as

BroadR

or just

)

and

One Pair Ethernet

(

OPEN

). Only minor differences exist

between the 100BASE-T1 and BroadR-Reach specifications, and

the RAD-Galaxy is compatible with both standards.

1.2 Package Contents

Your RAD-Galaxy package includes both hardware and software.

Hardware

You should receive the following:

•

The RAD-Galaxy device.

•

One

RAD-Galaxy Ethernet Cable Adapter

(HD-26F to HD-26M + DB-9F + RJ-45F).

•

One

neoVI FIRE 2 Ethernet Cable Adapter

(HD-26F to DB-25M + DB-9M + RJ-45F).

Содержание RAD-Galaxy









































































































Результаты поиска

Содержание RAD-Galaxy

Отзывы:

Похожие инструкции для RAD-Galaxy

Бренды по названию

Популярные бренды

Intrepid Control Systems RAD-Galaxy, Руководство пользователя

Результаты поиска

Содержание RAD-Galaxy

Отзывы:

Похожие инструкции для RAD-Galaxy

Бренды по названию

Популярные бренды