Intimus INT-GU-07310EPSHP, Руководство по эксплуатации

Страница: 37 / 85

Operation Manual 7310 EPSHP
37
Cutting can be done if:
1. there is no object in the work area of the light barrier - the green OSSD 1 LED lights
up (Fig.11) on the receiver 1 (Fig.19).
2. the green push button switch 2 is pressed.
3. the two buttons 3 were pressed simultaneously.
Keep both buttons 3 until the material is cut.
The return of the knife and its stop in the upper return position and the movement of the
pressure beam upwards is automatic.
Releasing the buttons 3 during the movement of the pressure beam and the knife downwards
interrupts this movement. If an object gets caught in the light barrier working area, the
pressure beam and the knife will stop moving. To continue cutting, remove the unauthorized
item and simultaneously restart both buttons 3.
Paper clips or other hard objects can damage the blade!
7.8 Air Table
The surface of the cutter table is equipped with air nozzles 1 (fig.20.
Figure 20.
To turn on the air supply press the blower button on the programmer 2 screen (Figure
20).
After switching on the air supply, moving the pile becomes easier. During the cutting,
pressing or manual pressing (testing), the air supply is switched off automatically