Intimus INT-GU-07310EPSHP, Руководство по эксплуатации

Страница: 15 / 85

Operation Manual 7310 EPSHP
15
2.8 Safe working rules
1. Training of the operator:
• aware of the potential hazards that may occur when operating the machine
•
clearly defining activities which, under the conditions of a given plant, are or are not
the responsibility of the cutter operator and are reserved for designated authorized
persons, in particular as regards the removal of defects and repairs - including
electrical installations.
2. Prohibition to use the machine if:
•
the machine is used contrary to its intended use and/or the machine parameters
specified in the operating instructions would be exceeded
• the cutter is visibly inefficient
•
any covers of moving parts have been removed from the cutter
3. Order:
•
Checking the correctness of the protection devices:
two-handed control (each time before starting work)
contactless protective device (each time before starting work)
• order to carry out maintenance and repairs with disconnected electrical power
The above-mentioned requirements should be the subject of training and the content
of the station instructions!
2.9 Safety control
Periodic security check should be carried out in accordance with the law. These
provisions concern:
•
accident prevention
• guarantee of efficient work and precision of operation
•
eliminating production stoppages.
INFO
At the latest after 5 years of use, at least control of the following functions
should be carried out and the results should be documented.
•
operation of the control function
• check the correct position of the knife
•
control of the power supply of the machine linear indicator
•
operation of the safety curtain
• operation of the two-hand control function
•
protection against continuous knife movement.
The above mentioned service should be ordered by the machine manufacturer's
technical service.