Intimus INT-GU-07310EPSHP, Руководство по эксплуатации

Страница: 12 / 85

Operation Manual 7310 EPSHP
12
2.5 Description and evaluation of residual risk
intimus International GmbH takes responsibility for the construction of the guillotine in order
to eliminate the danger, although some risk elements during the cutting machine operation
are possible. Residual risk resulting from incorrect behavior of the cutter operator.
• Failure to follow the safety rules described in the operating instructions
•
Using the machine for other purposes than those described in the user's manual
•
Staying unauthorized persons, especially children, when cutting on the machine
•
Unauthorized making any alterations
•
Cleaning and lubrication of the cutter during operation
• Work with dismantled or defective covers
•
Manipulation within the drive units and moving parts of the cutter during operation
• Checking the cutter's technical condition and performing servicing or repairs with the
cutting machine
•
Checking transmission gears during operation
When presenting the residual risk, the cutter is treated as a device that was designed
and manufactured according to the state of the art in the year of its manufacture.
Residual risk assessment
When following such recommendations as:
• Comply with the safety rules described in the operating instructions
•
Careful reading of the operating instructions
• It is forbidden to put your hands in dangerous and forbidden places
•
It is forbidden to make any alterations on your own
• Prohibition of the machine in the presence of unauthorized persons, especially
children
•
No modification of the software of programmable control systems
•
Maintenance and repair of the cutter only by suitably trained persons
• Operating the cutter by persons who have been previously trained and read the
operating instructions
•
Cutter protection against access of children residual threats can be eliminated.
2.6 Safety systems used in the cutter
•
Two-handed protective device - the cut is released by the two-handed cut start
system
•
Non-contact protection device
- an optoelectronic device that creates a safety
curtain
•
Control system - position control at the upper turning point of the knife and the
pressure beam.