CRAIN No. 290 SEAM CUTTER PLUS INSTRUCTIONS
SEAM CUTTING INSTRUCTIONS
Adjusting the row guide:
Loosen the three screws which allow the row guide to move up or down.
Part the nap of the carpet to be trimmed with a row finder or separator.
Set the base of the Seam Cutter on the carpet with the extended row
guide dropping into the parted row. With some downward pressure on
the handle of the tool, press the row guide down to the bottom of the row.
Once the row guide depth is set, retighten the three screws.
NOTE: A properly adjusted row guide will ride on the bottom of the row
and the base will be flat on the face of the carpet. The base should not
teeter back and forth on the row guide. If it does, shorten the depth of the
guide until there is no rocking, yet the row guide still contacts the bottom
of the row.
LOOSEN ROW GUIDE SCREWS (3)
ROW
GUIDE
PRESS DOWN ON ROW GUIDE
TO BOTTOM OF ROW
BASE
FLAT ON
FACE OF
CARPET
PRESS
