SEPAMAT F-SC_Manual_Vers.1.0e_en
10
Button
Description
+
- increases the discharge pressure by
0.5 bar per keystroke (possible at any
time during operation)
- raises the setting in the setting mode in
one step
- reduces the discharge pressure by 0.5
bar per keystroke (possible at any
time during operation)
- lowers the setting in the setting mode
in one step
START
START
- starts the pump with the first self-
initialization or after a RESET
STOP
STOP
- instantaneous stop of the pump
5. Overview of components
The
SMT-F-SC
has a modular design. Each component can be separately exchanged.
5.1 Components of the pump controller
The pump controller (see section 4.1) monitors
the pressure in pressure line system and
maintains it at a constant level by speed
controller.
The
controller
reduces
power
consumption especially with small flow rates and
increases the service life of the pump.
1. Motor pump (OUT), 3-phase
2. Pressure sensor (4-20 mA output), ¼” male
3. Power supply 230 V AC/50Hz
5.1.1 Description of display and buttons
1
2
3