SEPAMAT F-SC_Manual_Vers.1.0e_en
21
The provided rubber clamping device is to be fit on the back
side of the unit in the lower corners.
Thanks to the rubber pads, the device can be installed
close to the wall. The unevenness of the wall can be
balanced by various screwing depths.
6.2 Connection to the mains water line
The connection to the mains water supply is done with the provided flexible hose and stopcock.
Screw the gland screw into the chamber connection
and carefully tighten with a fixed wench.
Note:
The flexible hose must not be overtightened as this
may interfere with the internal float valve on the
opposite side of the connection. All provided flexible
hoses have gland screws with flat washers. The rubber
washers must be present. Additional sealing material
must not be used on gland nuts!
Screw the gland screw on the other end of the flexible
pipe into the stopcock mounted on the mains water line.
