SEPAMAT F-SC_Manual_Vers.1.0e_en
24
7. Start-up and use
1. Open the mains water line stopcock so that the
separation chamber is filled with water.
Note:
In maintenance mode the pump primed with water
automatically over the mains water tank. In this case
the pump doesn’t need to be filled up with water by
hand.
Attention:
The pump must not be dry-running!
2. Close the pressure line shut-off valve.
3. Open the air vent (hold a bucket of water under the air
vent) and start the pump by plugging in the mains
power.
Let the water run from the air vent into the water bucket
until there is no more sign of bubbles (a clear stream)
meaning that all air has been removed from the suction
line.
