SEPAMAT F-SC_Manual_Vers.1.0e_en
3
Speed control
In both modes (automatic/maintenance), the speed of the centrifugal pump is controlled by a
frequency converter corresponding to a set pressure level. The pressure is monitored via a built-in
analog pressure sensor. The current is monitored with the basic controller. This ensures 100% that
the pump never dry runs. All operating parameters such as time-delay, idle and load power
consumption and response time for the dry-running are specified by the controller.
Bluetooth connection
Two or three units of
SEPAMAT F-SC
can communicate with each other wireless via the integrated
Bluetooth and can be conveniently combined into a fully redundant, multiple pumping system. The
consecutive combination, cyclic switching of the pumps, connection with peak load and the
Master/Slave exchange is done automatically in case of the failure of device.
