IntesisBox IS-IR-KNX-1i, Руководство пользователя

Страница: 28 / 48

Intesis Box
®
KNX
– IR Universal AC
User's manual r1.0 eng
© Intesis Software S.L.U. - All rights reserved
This information is subject to change without notice
IntesisBox
®
is a registered trademark of Intesis Software SLU
URL
Email
tel http://www.intesisbox.com
info@intesisbox.com
+34 938047134
28 / 48
5.6.2 Enable use of bit-type Vane L-R objects (for Control)
This parameter shows/hides the bit-type
Control_ Vane Left-Right objects.
o
If set to
“no”
the objects will not be shown.
o
If set to
“yes”
the Control_ Vane Up-Down objects for each Position (1 to N) will appear. To activate a Vane
Position by using these objects, a
“1”
value has to be sent.
5.6.3 Enable use of bit-type Vane U-D objects (for Status)
This parameter shows/hides the bit-type
Status_ Vane Up-Down objects.
o
If set to
“no”
the objects will not be shown.
o
If set to
“yes”
the Status_ Vane Up-Down objects for each Position (1 to N) will appear. When a Vane
Position is enabled, a
“1”
value is returned through its bit-type object.
Pos. 1 Pos. 3
100%
Status_
0% 90% 50%
Control_
object Control_
Status_
30% 70%
Pos. 2
Control_
Status_
Pos. 4 Pos. 5
Control_ Control_
20% 40% 60% 80%
Status_ Status_