IntesisBox IS-IR-KNX-1i, Руководство пользователя

Страница: 32 / 48

Intesis Box
®
KNX
– IR Universal AC
User's manual r1.0 eng
© Intesis Software S.L.U. - All rights reserved
This information is subject to change without notice
IntesisBox
®
is a registered trademark of Intesis Software SLU
URL
Email
tel http://www.intesisbox.com
info@intesisbox.com
+34 938047134
32 / 48
Scene Configuration dialog
All the parameters in this section are related with the Scene properties and communication objects. A scene
contains values of: On/Off, Mode, Fan speed, Vane position and Setpoint Temperature.
Figure 5.11
Scene configuration settings
5.8.1 Enable use of scenes
This parameter shows/hides the scene configuration parameters and communication objects.
o
If set to
“no”
the scene parameters and communication objects will not be shown.
o
If set to
“yes”
the scene parameters and communication objects will be shown. To execute a scene through
the byte-type object, a value from
“0”
to
“4”
has to be sent, correponding each one to a different scene (i.e.
“0” = Scene 1;… “4” = Scene 5).
5.8.2 Scenes can be saved from KNX
This parameter shows/hides the
Control_ Save/Exec Scene and all the Control_ Save Scene (if enabled)
communication objects.