Intesis
Box
®
KNX
– IR Universal AC
User's manual r1.0 eng
© Intesis Software S.L.U. - All rights reserved
This information is subject to change without notice
IntesisBox
®
is a registered trademark of Intesis Software SLU
URL
Email
tel
http://www.intesisbox.com
[email protected]
+34 938047134
18 / 48
5.1.7 RGB LED mode
This parameter determines the working mode of the interface LED.
o
If set to
“Always off”
the LED will always be off.
o
If set to
“Always on”
the LED will always be on.
o
If set to
“Only on changes”
the LED will always change when there is a change of value in any of the
active communication objects.
AC supported features
Select the AC features of your AC unit to match both: the AC unit features with the enabled communication
objects and parameters.
Please, select these parameters carefully, otherwise not expected behavior may occur.
Figure 5.5
AC supported features
