Interlogix TVK-600, Руководство по настройке

Страница: 46 / 50

42 TVK-600 Configuration Manual
4. Press the numeric button 3 , or press PREV / NEXT to scroll up/down the list, to select
DVR by RS-485 mode and press OK . The Device ID screen appears.
5. To select your device, enter the ID number of the recorder to control and then press
the DEV button. The number appears beside DEV .
6. There is no KEY button on the keypad. This text stands for “Keyboard buttons”. You
need to enter both the monitor and camera IDs here.
Enter the ID of the desired monitor and press the MON button.
Note : 1 MON is the main monitor.
Then enter the camera ID to be controlled and press the CAM button. These
numbers appear alongside KEY on screen.
7. Select the desired multiview format. Enter the multiview number and then press the
MULT b utton. The multiview display settings available depends on the recorder.
Your selected multiview setting is seen on the monitor. See the complete list of
settings in Table 5 below.
8. You can now start to control the PTZ dome camera and recorder with the keypad.
See Figure 21 and Table 5 below for the description of how to use the keypad
buttons.
Figure 21: Controlling the DVR using the RS-485 serial port
Note : Buttons shown in white can be used in this mode.
Table 5: How to control a device using DVR by RS-485 mode