Interlogix TVK-600, Руководство по настройке

Страница: 43 / 50

TVK-600 Configuration Manual 39
4. Press the numeric button 2 , or press PREV / NEXT to scroll up/down the list, to select
DVR by IP mode and press OK . The Device ID screen appears.
5. To select your device, enter the ID number of the recorder to control and then press
the DEV button. The number appears beside DEV .
6. There is no KEY button on the keypad. This text stands for “Keyboard buttons”. You
need to enter both the monitor and camera IDs here.
Enter the ID of the desired monitor and press the MON button.
Then enter the ID of the desired camera and press the CAM button. These two sets
of numbers appear alongside KEY on screen.
Note : See the section “CAM button” on page 32 for information on the camera ID
depending on whether you are controlling it with a recorder.
7. Select the desired multiview format. Enter the multiview number and then press the
MULT b utton. The multiview display settings available depends on the recorder.
Your selected multiview setting is seen on the monitor. See the complete list of
settings in Table 4 below.
8. The keypad can now be used to control the selected camera. See Figure 20 and
Table 4 below for information on the buttons to use for controlling the selected
devices and controlling the recorder from the virtual front panel.
Figure 20: Controlling the DVR by IP
Note : Buttons shown in white can be used in this mode.