Interlogix TVK-600, Руководство по настройке

Страница: 17 / 50

TVK-600 Configuration Manual 13
Device management using the browser
The Device Management menu describes how you can add, modify, or delete a device
using the browser. You can also search for online devices.
This menu is only available to the administrator.
Add, edit or delete a device
You can add, edit and delete IP dome cameras, DVR/NVRs, an encoder, and a
decoder. You can also search the network for devices to add.
The devices connected to the keypad do not support all four keypad modes. See
Table 7 on page 46 for the list of supported devices by keypad mode.
Before you use the keypad, you must first add the desired devices that you want to
control with it. Once you have created the devices under
Device Management > Device
List , you can then go to the Input Channel and Output Channel menus to make any
changes to the devices.
Note : It is important that you keep a back up file of the devices you add to the keypad.
We recommend that you create a backup file in Excel format after adding a couple of
devices and export the file as a template. See “Import/export an input device list” on
page 16 for further information.
Channel and device ID
Every device added to the keypad is automatically allocated a unique ID by the system.
Cameras get an input channel ID. Recorders and decoders get a device ID. The ID is
allocated a number in the order in which the device is added to the keypad, irrespective
if it is a camera, recorder or decoder. For example, if you add two recorders to the
keypad, they will be allocated the device IDs 1 and 2. If you then add a decoder, it will
get device ID 3. If you then add a third recorder, it is device ID 4.
You can easily change the ID number under Edit in the Device Management menu.
Before changing the ID numbers of devices, you should first export to an Excel file the
list of devices configured in the keypad so that you can see what camera has been
allocated which ID number. It is not possible to export a list of the recorders, decoders
or monitor IDs. To find their IDs, you need to look at the
Device Management screens
for these devices.
For further information on channel and device IDs and how they are used, see “How to
use device and camera IDs” on page 31.