Interlogix TVK-600, Руководство по настройке

Страница: 27 / 50

TVK-600 Configuration Manual 23
Maintenance
Use this menu to:
• Reboot the keypad : The administrator can reboot the keypad.
• Restore the default settings : The administrator can reset the keypad to the
factory default settings. Network information such as IP address, subnet mask, and
gateway are not restored to factory default settings.
• Import/export configuration settings : The administrator can also export and
import configuration settings to and from the keypad. This is useful if you want to
copy the configuration settings to another device, or if you want to make a backup of
the settings.
• Update the keypad firmware : The administrator can update the decoder firmware
using the decoder web browser. The firmware can also be updated using TruVision
Device Manager (version 8.0 SP2). For further information, refer to the TruVision
Navigator user manual. The firmware upgrade file is labeled
tvk600.dav .
Note : Only the administrator can access and modify maintenance functions.
Figure 8: Maintenance window
To reboot the keypad:
1. In the keypad browser, go to Device Management > System Management >
Maintenance.
2. Under Remote Reboot , click the Remote Reboot button.
3. In the pop-up window, enter your admin password and click OK .
The system reboots.
To restore parameters to default factory settings:
1. In the keypad browser, go to Device Management > System Management >
Maintenance .
2. Under Restore the factory defaults , click Complete .
The changes appear immediately.