TruVision IP Thermal Camera Configuration Manual
63
To set up continuous snapshots:
1. From the Configuration panel, click
Configuration
>
Storage
>
Snapshot
.
2. Select the
Enable Timing Snapshot
check box to enable continuous snapshots.
3. Select the desired format of the snapshot, such as JPEG.
4. Select the desired resolution and quality of the snapshot. The quality can be low,
medium, or high.
5. Enter the time interval between two snapshots. Select the unit of time from the drop-
down list: milliseconds, seconds, minutes, hour, or day.
6. Set the schedule for when you want snapshots to be taken. Click
Edit
and enter the
desired schedule for each day of the week.
7. Click
Save
to save changes.
To set up event-triggered snapshots:
1. From the Configuration panel, click
Configuration
>
Storage
>
Snapshot
.
2. Select the
Enable Event-triggered Snapshot check box
to enable event-triggered
snapshots.
