TruVision IP Thermal Camera Configuration Manual
45
b) Select the desired day and click
to set the detailed time period. You can copy
the schedule to other days. Default is one period of 24 hours per day.
c) Click
OK
to save changes.
5. Specify the linkage method when an event occurs. Select one or more response
methods for the system when a fire source detection alarm is triggered.
Notify Surveillance Center
Sends an exception or alarm signal to remote management
software when an event occurs.
Send Email
Sends an email to a specified address when there is a scene
change detection alarm.
Note
: You must configure email settings before enabling this option.
See “To set up the email parameters” on page 17 for further
information. If you want to send the event snapshot together with
the email, select the “Attached Snapshot” option
Upload to FTP
Captures the image when an alarm is triggered and uploads the
snapshot to an FTP server.
Note
: To upload the snapshot to an FTP, you must first configure
the FTP settings. See “To define the FTP parameters” on page
18
for further information. Enable the
Upload Type
option.
To upload the snapshot to FTP when motion detection or an alarm
input is triggered, you must also select the
Enable Event-triggered
Snapshot
check box in the snapshot parameters. See “Snapshot
parameters” on page 54 for further information.
Trigger Channel
Triggers the recording to start in the camera.
Trigger Alarm Output
Triggers external alarm outputs when an event occurs. Select
“Select All” or individual alarm outputs.
Note
: This option is only supported by cameras that support alarm
output.
6. Click
Save
to save changes.
To display fire source information in live view:
1. From the Configuration panel, click
Local Configuration
.
2. Under
Fire Point
, select one or more options on how to display the fire information.
