54
TruVision IP Thermal Camera Configuration Manual
VCA configuration
The camera can do video content analysis (VCA) and send the video analytics results
(metadata) to an NVR or other platforms to generate a VCA alarm.
VCA resource type
You need to specify which type of VCA resource is to be used.
To select the VCA resource type:
1. From the Configuration panel, click
Configuration
>
System
>
VCA Resource
Type
.
2. Select one of the options:
Measu Behavior An Standard VCA Functions
: When enabled,
this lets you configure the parameters to measure temperature, display VCA
information and behavioral analysis. See “VCA information” below and “Behavior
analysis” on page 56 for more information.
Fire Source Detection
: When enabled, this lets you configure the parameters to
configure the parameters to trigger an alarm when the camera detects a fire source.
See “Fire source detection” on page 43 for further information.
3. Click
Save
to save the settings.
VCA information
You can set up the camera to display information on the target and alarm rules in the
video image. You can also configure the quality and resolution of snapshots and
streamed images. This function also displays the version of the algorithm library used.
Note
: This function is only available when
Temperature Measu Behavior
An Standard VCA Functions
has been enabled under the menu
Configuration
>
System
>
VCA Resource Type
. See the section “VCA resource type”
above.
To set up VCA information:
1. From the Configuration panel, click
VCA Configuration
>
VCA Info
2. Select the check boxes for the desired display information and snapshot settings.
