18
TruVision IP Thermal Camera Configuration Manual
To define the 802.1x parameters:
1. From the Configuration panel, click
Configuration
>
Network
>
802.1X
.
2. Select
Enable IEEE 802.1X
to enable the feature.
3. Configure the 802.1X settings, including EAPOL version, user name, and password.
The EAPOL version must be identical with that of the router or the switch.
4. Click
Save
to save changes.
Note
: The switch or router to which the camera is connected must also support the
IEEE 802.1X standard, and a server must be configured. Please apply and register a
user name and password for 802.1X in the server.
To define the QoS parameters:
1. From the Configuration panel, click
Configuration
>
Network
>
QoS
.
2. Configure the QoS settings, including Video / Audio DSCP, Event / Alarm DSCP
and Management DSCP. The valid value range of the DSCP is 0 to 63. The larger
the DSCP value, the higher the priority.
3. Click
Save
to save changes.
Note
: The system needs to be rebooted in order for the changes to take effect.
To define the FTP parameters:
1. From the Configuration panel, click
Configuration
>
Network
>
FTP
.
2. Configure the FTP settings, including server address, port, user name, password,
directory, and upload type.
Anonymous:
Select the check box to enable the anonymous access to the FTP
server.
Directory:
In the
Directory Structure
field, select the root directory, main directory
and subdirectory. When the Main directory is selected, select the Device Name,
Device Number or Device IP for the name of the directory. When the Subdirectory is
selected, select the Camera Name or Camera No. as the name of the directory.
Upload Type:
To enable snapshots to be uploaded to the FTP server.
3. Click
Save
to save changes.
To define the UPnP parameters:
1. Click
Configuration
>
Network
>
UPnP
.
2. Select the check box to enable the UPnP function. The name of the detected device
appears under “Friendly name”. It can be edited.
3. Click Save to save changes.
To set up the email parameters:
1. From the Configuration panel, click
Configuration
>
Network
>
.
