Intel SBXL52 - Server Compute Blade, Руководство по техническому обслуживанию аппаратной части

Страница: 99 / 126

Symptom-to-FRU index
85
✏
NOTE
See “System” on page 104 to determine which components should be replaced by a field service
technician.
Diskette drive problems
Symptom FRU/action
Diskette drive activity LED
stays on, or the system
bypasses the diskette drive. 1. If there is a diskette in the drive, verify that:
• The diskette is inserted correctly in the drive.
• The diskette is good and not damaged. (Try another diskette if you have
one.)
— The drive light comes on (one-second flash) when the diskette is
inserted.
• The diskette contains the necessary files to start the computer.
• The diskette drive is enabled in the Configuration/Setup utility program.
• The software program is working properly.
• The cable is installed correctly (in the proper orientation).
2. To prevent diskette drive read/write errors, be sure the distance between
monitors and diskette drives is at least 76 mm (3 in.).
3. Cable.
4. Run diskette drive diagnostics.
5. Diskette drive.
6. Media tray card.
✏
NOTE
See “System” on page 104 to determine which components should be replaced by a field service
technician.
Expansion enclosure problems
Symptom FRU/action
The SCSI storage expansion
unit used to work but does not
work now. 1. Verify that the enclosure is installed correctly.
2. For more information, see your SCSI storage expansion unit documentation.
✏
NOTE
See “System” on page 104 to determine which components should be replaced by a field service
technician.
Hard disk drive problems
Symptom FRU/action
Not all drives are recognized
by the hard disk drive
diagnostic test (Fixed Disk
test). 1. Remove the first drive not recognized and try the hard disk drive
diagnostic test again.
2. If the remaining drives are recognized, replace the drive you removed with a
new one.