Intel SBXL52 - Server Compute Blade, Руководство по техническому обслуживанию аппаратной части

Страница: 83 / 126

69
9 Symptom-to-FRU index
This index supports the SBXL52 blade servers.
Notes:
1. Check the configuration before you replace a FRU. Configuration problems can cause false
errors and symptoms.
2. For Intel devices not supported by this index, refer to the manual for that device.
3. Always start with “General checkout” on page 19
The symptom-to-FRU index lists symptoms, errors, and the possible causes. The most likely cause is
listed first. Use this symptom-to-FRU index to help you decide which FRUs to have available when
servicing the server.
The left-hand column of the tables in this index lists error codes or messages, and the right-hand
column lists one or more suggested actions or FRUs to replace.
✏
NOTE
In tables with more than two columns, multiple columns are required to describe the error
symptoms.
Take the action (or replace the FRU) suggested first in the list of the right-hand column, then try the
server again to see if the problem has been corrected before taking further action.
✏
NOTE
Reseat a suspected component or reconnect a cable before replacing the component.
The POST BIOS code displays POST error codes and messages on the screen.
Beep symptoms
Beep symptoms are short tones or a series of short tones separated by pauses (intervals without
sound). See the examples in the following table.
One beep after successfully completing POST indicates the system is functioning properly.
Beeps Description
1-2-3
•
One beep
•
A pause (or break)
•
Two beeps
•
A pause (or break)
•
Three beeps
4 Four continuous beeps