Intel SBXL52 - Server Compute Blade, Руководство по техническому обслуживанию аппаратной части

Страница: 45 / 126

Installing options
31
Switches and jumpers
The following illustration shows the location of the switches and jumpers on the system board.
Switches
Table 1 describes the function of each switch on switch block (SW2).
Switch
number
Default value
Switch
description
1 through 4 Off Reserved.
5 Off Power-on override. When toggled to On, this switch forces the blade server to turn
on, overriding the power-on button. The power-on override switch should be used for
debug purposes only and should not be used to override management module
control of the server.
6 through 7 Off Reserved
8 Off Power-on password override. Changing the position of this switch bypasses the
power-on password check the next time the blade server is turned on and starts the
Configuration/Setup Utility program so that you can change or delete the power-on
password. You do not need to move the switch back to the default position after the
password is overridden.
See “Using passwords” on page 14 for additional information about the power-on
password.
Table 1. Switch block (SW2)