Intel SBXL52 - Server Compute Blade, Руководство по техническому обслуживанию аппаратной части

Страница: 54 / 126

40
SBXL52: Hardware Maintenance Manual and Troubleshooting Guide
7.
Remove the heat-sink filler.
8.
Install the microprocessor:
a.
Remove the protective cover, tape, or label from the surface of the microprocessor socket, if
one is present.
b.
Touch the static-protective package containing the new microprocessor to any unpainted
metal surface on the SBCE chassis or any unpainted surface on any other grounded rack
component; then, remove the microprocessor from the package.
c.
Rotate the locking lever on the microprocessor socket from its closed and locked position
until it stops or clicks in the fully open position (approximately a 135
°
angle), as shown.
Attention: You must ensure that the locking lever on the microprocessor socket is in the
fully open position before you insert the microprocessor in the socket. Failure to do so might
result in permanent damage to the microprocessor, microprocessor socket, and system
board.
d.
Center the microprocessor over the microprocessor socket. Align the triangle on the corner
of the microprocessor with the triangle on the corner of the socket and carefully press the
microprocessor into the socket.
Attention:
•
Do not use excessive force when pressing the microprocessor into the socket.
•
Make sure that the microprocessor is oriented and aligned correctly in the socket before
you try to close the lever.
or
Lever closed
Lever
fully
open
Lever closed
Lever
fully
open