manualshive.com logo in svg

Intel NetStructure ZT 5085, Руководство пользователя

Intel NetStructure ZT 5085 - высокопроизводительное устройство для сетевого управления. Бесплатное руководство пользователя доступно для загрузки с manualshive.com. Руководство поможет вам быстро освоить функционал устройства. Скачайте его прямо сейчас и настройте вашу сеть на высшем уровне.

Поделиться
Скачать
background image

105

Technical Product Specification

Agency Approvals

F.5

Product Safety Information

Review the following precautions to avoid injury and prevent damage to this product, or any 
products to which it is connected. To avoid potential hazards, use the product only as specified.

Read all safety information provided in the component product user manuals and understand the 
precautions associated with safety symbols, written warnings, and cautions before accessing parts 
or locations within the unit. Save this document for future reference.

Caution:

To Avoid Electric Overload: To avoid electrical hazards (heat shock and/or fire hazard), do not 
make connections to terminals outside the range specified for that terminal. See the product user 
manual for correct connections.

Caution:

To Avoid the Risk of Electric Shock: When supplying power to the system, always make 
connections to a grounded main. Always use a power cable with a grounded plug (third grounding 
pin). Do not operate in wet, damp, or condensing conditions.

Caution:

System Airflow Requirements: Platform components such as Single Board Computers, Ethernet 
Switches, etc., are designed to operate with external airflow. Components can be destroyed if they 
are operated without external airflow. External airflow is normally provided by chassis fans when 
components are installed in compatible chassis. Air Management Blades (AMBs) must be installed 
over unused front chassis slots and Filler panels must be installed over unused rear chassis slots so 
that airflow requirements are met. Please refer to the product data sheet for airflow requirements if 
you are installing components in custom chassis. 

Caution:

Microprocessor Heatsinks May Become Hot During Normal Operation: To avoid burns, do not 
allow anything to touch processor heatsinks.

Caution:

Do Not Operate Without Covers: To avoid electric shock or fire hazard, do not operate this 
product with any removed enclosure covers or panels.

Caution:

To Avoid the Risk of Electric Shock: Do not operate in wet, damp, or condensing conditions.

Caution:

Do Not Operate in an Explosive Atmosphere: To avoid injury, fire hazard, or explosion, do not 
operate this product in an explosive atmosphere. 

Caution:

If Your System Has Multiple Power Supply Sources: Disconnect all external power connections 
before servicing.

Warning:

Power Supplies Must Be Replaced by Qualified Service Personnel Only.

Caution:

Lithium Batteries Are Not Field-Replaceable Units: There is a danger of explosion if a battery is 
incorrectly replaced or handled. Do not disassemble or recharge the battery. Do not dispose of the 
battery in fire. When the battery is replaced, the same type or an equivalent type recommended by 
the manufacturer must be used. Used batteries must be disposed of according to the manufacturer’s 
instructions. Return the unit to Intel for battery service.

           

Содержание NetStructure ZT 5085











































































































Отзывы:

Нет отзывов

Похожие инструкции для NetStructure ZT 5085

Eaton INDGW-X2 Manual preview
INDGW-X2
Бренд: Eaton Страницы: 10
Lattice Semiconductor CrossLink-NX Quick Start Manual preview
CrossLink-NX
Бренд: Lattice Semiconductor Страницы: 15
Lattice Semiconductor iCE40 UltraLite Usage Manual preview
iCE40 UltraLite
Бренд: Lattice Semiconductor Страницы: 13
M86 Security R3000 Series Evaluation Manual preview
R3000 Series
Бренд: M86 Security Страницы: 46
Vonets MINI300 Quick Setting Manual preview
MINI300
Бренд: Vonets Страницы: 8
IEI Technology HPE-4S1 Quick Installation Manual preview
HPE-4S1
Бренд: IEI Technology Страницы: 3
B&B Electronics Parallel & Serial Port Checker PPC User Manual preview
Parallel & Serial Port Checker PPC
Бренд: B&B Electronics Страницы: 4
ZALMAN CNPS6500B-AlCu User Manual preview
CNPS6500B-AlCu
Бренд: ZALMAN Страницы: 4
National Instruments FieldPoint cFP-RTD-122 Operating Instructions Manual preview
FieldPoint cFP-RTD-122
Бренд: National Instruments Страницы: 15
Aruba IntroSpect Analyzer 2 Series Quick Start Manual preview
IntroSpect Analyzer 2 Series
Бренд: Aruba Страницы: 5
Optostar OP-8000-EDFA-1U Series Manual preview
OP-8000-EDFA-1U Series
Бренд: Optostar Страницы: 9
ADS Technologies PTV-352-EFG Hardware Quickmanual preview
PTV-352-EFG
Бренд: ADS Technologies Страницы: 1
Patton electronics FORESIGHT 6300 User Manual preview
FORESIGHT 6300
Бренд: Patton electronics Страницы: 145
ICOP Technology BF01 User Manual preview
BF01
Бренд: ICOP Technology Страницы: 34
Dahua NVR41-4KS2 Series User Manual preview
NVR41-4KS2 Series
Бренд: Dahua Страницы: 452
ICP DAS USA I-87K Series User Manual preview
I-87K Series
Бренд: ICP DAS USA Страницы: 31
Stahl HFisolator 9730/26-11 Operating Instructions preview
HFisolator 9730/26-11
Бренд: Stahl Страницы: 2
CAME 848EA-0120 Setup And User'S Manual preview
848EA-0120
Бренд: CAME Страницы: 32

Бренды по названию

Популярные бренды

Загрузить еще бренды