Intel NetStructure ZT 5085 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 106

background image

9

Technical Product Specification

Introduction

Introduction

1

This chapter provides an overview of the ZT 5085 system. It includes a product definition and
summaries of the system's hardware and software features. This chapter is useful for comparing the
features of the ZT 5085 to the needs of a specific application.

1.1

Product Definition

The Intel

®

NetStructure™ ZT 5085 12U Redundant Host Packet Switched Platform is one of

several telecom building blocks from Intel, providing OEM equipment designers with carrier-
grade, standards-based, high availability solutions built on the PICMG* 2.16 specification. This
high-capacity CompactPCI* platform features 18 node slots and a redundant infrastructure (fabric,
management, power, and cooling) making it ideal for carrier-grade telecom and Internet
applications. Beyond its high availability features, the ZT 5085 is highly modular, scalable, and
serviceable. It is compatible with the Intel

®

NetStructure™ family of packet switched backplane

products, and is designed to operate with third-party boards meeting the PICMG* 2.16
specifications.

Hot-swappable system components provide built-in redundancy to simplify replacement and
minimize service time. Redundant chassis management modules enable customers to manage
multiple processor boards and conduct chassis diagnostics remotely for enhanced system
reliability. Two 6U slots are reserved for PICMG* 2.16 standard fabric boards (Ethernet switches).
The ZT 5085 platform routes Ethernet signals across the midplane without the use of cables; saving
time in setup, maintenance, and repair, and eliminating the thermal challenges of traditional cabling
methods.

1.2

Highlights

•

High Capacity - 12U, 19-inch rack-mount enclosure

— 21 slots (18 node slots, two fabric slots, and two 3U Chassis Management slots)

— Efficient front-to-rear cooling

— Up to 50 W per node slot, 80 W per fabric slot power and cooling

Note:

With 250 W supplies, the ZT 5085 can support an average of 40 W per node slot and 60 W per
fabric slot, with a maximum of 50 W per node slot and 80 W per fabric slot. See

Chapter 4, “Power

Subsystem,”

for details.

•

High Availability - Delivering “five-nines” availability

— Redundant modules for fault recovery:

—Multi-Purpose slots supporting two CompactPCI* bus segments

—Redundant System Slot

—Two PICMG* 2.16 10/100/1000 fabric slots supporting hot-swappable boards

—Two hot-swappable IPMI-based Chassis Management Modules

«
...
7
8
9
10
11
...
»

Содержание NetStructure ZT 5085











































































































Отзывы:

Нет отзывов

Похожие инструкции для NetStructure ZT 5085

Бренд: Barracuda Networks Страницы: 2

NVIP- NVRA0104/GO

Бренд: Novus Страницы: 44

AXP-100H MUSCLE

Бренд: Thermalright Страницы: 36

RCO-3000 Series

Бренд: C&T Solution Страницы: 96

Бренд: ICP DAS USA Страницы: 8

Бренд: Mitsubishi Страницы: 874

Бренд: Mellanox Technologies Страницы: 57

Бренд: IFM Electronic Страницы: 14

Бренд: Paradyne Страницы: 6

Бренд: ADTRAN Страницы: 2

Бренд: Aim Страницы: 35

Бренд: Vivotek Страницы: 46

Бренд: El.Mo Страницы: 16

Бренд: IEI Technology Страницы: 146

SelectIO 7 Series

Бренд: Xilinx Страницы: 188

Бренд: Aegis Страницы: 7

RGB 460xi FSR Series

Бренд: Extron electronics Страницы: 9

Бренд: Crestron Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды