manualshive.com logo in svg

Intel NetStructure ZT 5085, Руководство пользователя

Intel NetStructure ZT 5085 - высокопроизводительное устройство для сетевого управления. Бесплатное руководство пользователя доступно для загрузки с manualshive.com. Руководство поможет вам быстро освоить функционал устройства. Скачайте его прямо сейчас и настройте вашу сеть на высшем уровне.

Поделиться
Скачать
background image

2

 

Technical Product Specification

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY 
ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN 
INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS 
ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES 
RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER 
INTELLECTUAL PROPERTY RIGHT. Intel products are not intended for use in medical, life saving, life sustaining applications.

Intel may make changes to specifications and product descriptions at any time, without notice.

Designers must not rely on the absence or characteristics of any features or instructions marked “reserved” or “undefined.” Intel reserves these for 
future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them.

Intel

® 

NetStructure

TM

 ZT 5085 12U Redundant Host Packet Switched PlatformThis Technical Product Specification as well as the software described 

in it is furnished under license and may only be used or copied in accordance with the terms of the license. The information in this manual is furnished 
for informational use only, is subject to change without notice, and should not be construed as a commitment by Intel Corporation. Intel Corporation 
assumes no responsibility or liability for any errors or inaccuracies that may appear in this document or any software that may be provided in 
association with this document. 

Except as permitted by such license, no part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any 
means without the express written consent of Intel Corporation. 

Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.

Copies of documents which have an ordering number and are referenced in this document, or other Intel literature may be obtained by calling 
1-800-548-4725 or by visiting Intel's website at http://www.intel.com.

AnyPoint, AppChoice, BoardWatch, BunnyPeople, CablePort, Celeron, Chips, CT Media, Dialogic, DM3, EtherExpress, ETOX, FlashFile, i386, i486, 
i960, iCOMP, InstantIP, Intel, Intel Centrino, Intel logo, Intel386, Intel486, Intel740, IntelDX2, IntelDX4, IntelSX2, Intel Create & Share, Intel GigaBlade, 
Intel InBusiness, Intel Inside, Intel Inside logo, Intel NetBurst, Intel NetMerge, Intel NetStructure, Intel Play, Intel Play logo, Intel SingleDriver, Intel 
SpeedStep, Intel StrataFlash, Intel TeamStation, Intel Xeon, Intel XScale, IPLink, Itanium, MCS, MMX, MMX logo, Optimizer logo, OverDrive, 
Paragon, PC Dads, PC Parents, PDCharm, Pentium, Pentium II Xeon, Pentium III Xeon, Performance at Your Command, RemoteExpress, SmartDie, 
Solutions960, Sound Mark, StorageExpress, The Computer Inside., The Journey Inside, TokenExpress, VoiceBrick, VTune, and Xircom are 
trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.

*Other names and brands may be claimed as the property of others.

Copyright © 2004, Intel Corporation. All rights reserved.

           

Содержание NetStructure ZT 5085











































































































Отзывы:

Нет отзывов

Похожие инструкции для NetStructure ZT 5085

3Com 3C16080 Important Information preview
3C16080
Бренд: 3Com Страницы: 2
3Com 3C421600A Quick Setup Manual preview
3C421600A
Бренд: 3Com Страницы: 74
3Com 3C421600A Installation Manual preview
3C421600A
Бренд: 3Com Страницы: 6
Paradyne COMSPHERE 3610 User Manual preview
COMSPHERE 3610
Бренд: Paradyne Страницы: 112
Profile LS901-E1 Instruction Manual preview
LS901-E1
Бренд: Profile Страницы: 6
ekwb EK-Vector Radeon RX5700 + XT Backplate Installation Manual preview
EK-Vector Radeon RX5700 + XT Backplate
Бренд: ekwb Страницы: 7
Zonet ZUN2200 Quick Installation Manual preview
ZUN2200
Бренд: Zonet Страницы: 2
EMCIS LISN User'S Operating Manual preview
LISN
Бренд: EMCIS Страницы: 14
Qlogic Storage Networking (Unified Fabric Pilot) Installation Manual preview
Storage Networking (Unified Fabric Pilot)
Бренд: Qlogic Страницы: 76
ADTRAN NetVanta 873 Specifications preview
NetVanta 873
Бренд: ADTRAN Страницы: 2
Segger J-Link-OB-STM32F072-128KB User Manual preview
J-Link-OB-STM32F072-128KB
Бренд: Segger Страницы: 18
Seagate CHEETAH ST34501FC Product Manual preview
CHEETAH ST34501FC
Бренд: Seagate Страницы: 68
Altera Stratix II User Manual preview
Stratix II
Бренд: Altera Страницы: 33
Konica Minolta SRX-101A Operation Manual preview
SRX-101A
Бренд: Konica Minolta Страницы: 31
National Instruments PXI Terminal Block NI TB-2709 Installation Manual preview
PXI Terminal Block NI TB-2709
Бренд: National Instruments Страницы: 12
Sony Ericsson GC83 Specification preview
GC83
Бренд: Sony Ericsson Страницы: 2
Altimium CVHH2 User Manual preview
CVHH2
Бренд: Altimium Страницы: 12
Vista VIPER H4 User Manual preview
VIPER H4
Бренд: Vista Страницы: 93

Бренды по названию

Популярные бренды

Загрузить еще бренды