Intel® Server System M20MYP1UR System Integration and Service Guide
14
2.1
System Top Cover Removal / Installation
Required Tools and Supplies:
•
Anti-static wrist strap and conductive workbench pad (recommended)
•
Phillips* (cross head) screwdriver (#2 bit)
2.1.1
System Top Cover Removal
The server system must be operated with the system cover in place to ensure proper cooling. The cover
must be removed to add or replace components inside of the system. Before removing the system cover,
power off the system and disconnect all peripheral devices and power cable.
Note:
A non-skid surface or a stop behind the server system may be required to prevent the server system
from sliding on the work surface. New systems as shipped from Intel will require a screwdriver to remove
three screws on the top cover.
Figure 1. System top cover removal
1.
If present, remove three screws from the top cover (see Letter A), and save them for future use.
2.
Push down on the two top cover buttons (See letter B).
3.
Slide the top cover towards the back to remove it (see Letter C).
Содержание M20MYP1UR
Страница 2: ...Intel Server System M20MYP1UR System Integration and Service Guide 2 Blank page...
Страница 56: ...Intel Server System M20MYP1UR System Integration and Service Guide 56 Figure 54 DIMM fault LEDs...
Страница 103: ...Intel Server System M20MYP1UR System Integration and Service Guide 103 1 2 3 4 5 ESD 6 1 2 3...
Страница 104: ...Intel Server System M20MYP1UR System Integration and Service Guide 104 1 2 3 4 5...
