Integra Integra Research RDC-7.1, Инструкция по эксплуатации

Страница: 49 / 156

49
Installation and Connections
Effective Sensor Layout
In this situation, you will need to use a commercially
available IR emitter. Connect the mini plug of the IR
emitter to the IR OUT terminal on the RDC-7.1 and
then place the IR emitter on the remote sensor of the
component or facing it. When the IR emitter is con-
nected, only the signal input to the IR IN terminal is
output to the IR OUT terminal. The signal input from
the remote sensor on the front of the RDC-7.1 will not
be output to the IR OUT terminal.
Making Sensor Connections
When you place the IR receiver in the main room, con-
nect the cable from the connecting block to the IR OUT
MAIN terminal. When you place the IR receiver in the
remote zone, connect the cable from the connecting
block to the ZONE 2 or ZONE 3 terminal accordingly.
Using an External
Device with 12V Trigger
Terminal
– Other than USA and
Canadian models –
You can automatically turn on the connected AV com-
ponents with the output signal from the RDC-7.1’s 12V
TRIGGER OUT terminal.
Making a Connection
Connect the 12V TRIGGER OUT terminal on the
RDC-7.1 to the 12V TRIGGER IN terminal on other
components. Every 12V TRIGGER OUT terminal can
be connected to the components whether they are
placed in the main room, Zone 2, or Zone 3.
The RDC-7.1 has five 12V TRIGGER OUT terminals
and the maximum currents to be connected are as fol-
lows:
A: 200 mA
B, C, D and E: 100 mA
After making connections, configure the association
between the room (zone) and the component to be
turned on (Refer to “12V Trigger Assign” under “Input
Setup” on page 102).
If Remote Controller Signal Does not
Reach Other Components
IR Receiver
Remote controller
Connecting
block
IR IN
IR OUT
IR Emitter
RDC-7.1
Other
component
: Signal flow
MAIN
IR
ZONE 2
ZONE 3
OUT IN
: Signal flow
Other component
Emitter
Remote control
sensor
IR Emitter
Mini plug
RDC-7.1
A
C
B
12V
TRIGGER
OUT
D
E
200mA MAX.
100mA MAX.
100mA MAX.
100mA MAX.
100mA MAX.
200mA MAX.
12V TRIGGER
IN
100mA MAX.
12V TRIGGER
IN
100mA MAX.
12V TRIGGER
IN
100mA MAX.
12V TRIGGER
IN
100mA MAX.
12V TRIGGER
IN
Device A
Device B
Device C
Device D
Device E