Integra Integra Research RDC-7.1, Инструкция по эксплуатации

Страница: 65 / 156

65
Operations
Listening to RDS Broadcasts (European models only) —Continued
If the station you are currently tuned into is broadcasting
RT signals, they will be displayed in the front display on
the RDC-7.1. If the station does not, this function will be
ignored.
• If the current station you are listening to is not an RDS
station, only the frequency of the station will appear.
• If “Waiting” appears on the display, more time is
required to receive the RT information. When the
information is received, the characters will scroll
across the front display.
• If “No Text Data” appears on the display, RT informa-
tion is not available.
• The display shows the frequency for 3 seconds and
returns to program service name.
Displaying Radio Text (RT)
To display the radio text, press the
[RT/PTY/TP] button once.
Performing a PTY Scan
1
Press the [Tuner] input source
button and select the FM input
source.
2 Press the [RT/PTY/TP] button
twice.
The current program type appears on the
display.
3
Using the [
]
and [
] cursor
buttons, select the PTY program
type you desire.
On
Standby/On
Standby
Pure Audio
On
Master Volume
Power
DVD Video 1 Video 2 Video 3 Video 4 Video 5 Video 6 Video 7 Tape 1 Tape 2 Tuner Phono Net Audio C D Open/Close
Zone 2 ( ) GRN
Rec/ Zone 3 ( ) RED
O f f
Phones Clear
Rec/ Zone 3 Zone 2 Off DSP Display Tuning Tuning Mode Preset Memory Setup Exit Enter RT/PTY/TP
AV Controller RDC-7.1
/
Tuner
RT/PTY/TP Enter
RT/PTY/TP
Tuner
RT/PTY/TP
4 Press the [Enter] button dial.
The RDC-7.1 will scan until it reaches a
station of the program type you selected.
It will then stop briefly at that station
before continuing on until it reaches the
next station. Pressing the [Enter] button
dial stops the PTY scan at that point. If
you press the [RT/PTY/TP] while
“NONE” is displayed, “PTY ?” will
appear. In this case, return to step 3.
5
Press the [Enter] button dial when
it reaches the station that you want
to listen to.
“Not Found” will appear when no RDS
signal is being received from the station.
Performing a TP Scan
1
Press the [Tuner] input source
button.
2 Press the [RT/PTY/TP] button
three times.
“[TP]” will appear if the current station is
broadcasting TP signals. This station will
periodically broadcast traffic information.
To find a different station, proceed to the
next step. Also, if “TP” is displayed,
proceed to the next step.
3
Press the [Enter] button.
The RDC-7.1 will scan until it reaches a
station broadcasting traffic information. If
“Not Found” appears on the display, a TP
station cannot be located.
Enter
Enter
Tuner
RT/PTY/TP
Enter