30
Connecting AV Components
In addition to the conventional terminals, the RDC-7.1 has various terminals that are capable of next-generation digital
transmission.
Before connecting AV components to the RDC-7.1, make sure that your cable type matches the terminal shape and the
signal type and that the cable length is appropriate for the placement of your connected components.
Audio cables
*The audio input signal from the ETHERNET (Net-Tune) or MULTI-CH IN terminal will not be output to the HDMI
OUT terminal. Also, the DVD audio or SACD audio input signal from the i.LINK (AUDIO) terminal will not be output
to the HDMI OUT terminal.
When you play a source in the remote zone (Zone 2 or Zone 3), the following restrictions are applied.
• When you play the audio signal supplied through the i.LINK (AUDIO) interface, the audio signal will not be output
to Zone 2 or Zone 3. With this connection, you cannot record the audio signal from the source.
Types of Connection Cables and Terminals
Cable names
Cable forms
Terminals shapes
Description
Optical cable
The connection using these cable types trans-
mits digital audio signals. There is no sound
quality difference among these cable types. In
general, the consumer models are equipped
with optical or coaxial terminals and the profes-
sional models are equipped with AES/EBU ter-
minals.
Note:
Some optical cables have their own covers.
Before making a connection, remove the cov-
ers. When plugging in a cable, be sure to match
the connector shape with the terminal shape.
Each optical terminal on the RDC-7.1 has its
own shutter-type cover. For the RDC-7.1, plug
in the optical cables so that the optical cable
connector pushes the terminal cover down.
Coaxial cable
AES/EBU
Balanced Cable
Audio connection
cable
This connection transmits an analog audio sig-
nal. Plug the red connector (R) into the right
channel terminal and the white connector (L)
into the left channel connector.
Multichannel con-
nection cable
The terminals for this cable type are for DVD
players that are compatible with the DVD-Audio
format. This connection transmits multichannel
analog audio signals.
i.LINK connection
cable (4-pin (S400)
type)
This connection can be used for connecting
i.LINK (AUDIO)-enabled devices and to transmit
digital audio signals. Also, multichannel analog
audio signals from DVD-Audio or Super Audio
CD format sources will be transmitted digitally.
The RDC-7.1 handles only audio signals
through i.LINK connection.
Ethernet cable
(CAT-5 Straight
type)
The Ethernet cable is used for connecting multi-
ple PCs or network-ready audio components
that constitute a local area network (LAN).
A LAN is a smaller network composed within a
house or building. The connecting terminals for
the Ethernet cables are often called “LAN port”
or “broadband port.”
DIGITAL IN
(
BALANCED
)
AES / EBU
DIGITAL IN
(
BALANCED
)
AES / EBU
SBR
SBL
SR
SL
SUB
C
FR
FL
MULTI
- CH
IN 1
ETHERNET
(
Net-Tune
)
Содержание Integra Research RDC-7.1
Страница 1: ...AV Controller RDC 7 1 Instruction Manual...
