120
Preference
This menu allows you to configure the listening mode settings including audio effects and playback options.
a. Volume Display
You can switch the volume indication between an
absolute value and a relative value.
Absolute (absolute value):
Displayed in a range from 0
to 100.
Relative (relative value) (Default):
Displayed in a
range of –
∞
dB, –81.5 dB, –80 dB......18.0 dB. An
absolute volume value of 82 is equivalent to a relative
volume value of 0 dB.
b. Muting Level
You can adjust the volume level of muted sounds.
Specify at 10 dB intervals in a range from –
∞
dB and
–50 dB to –10 dB. The default is “–
∞
.” This option can
be set for Main B and Zone 2 as well as for Main A.
c. Maximum Volume
You can set the maximum output volume level to
prevent sounds from becoming too loud. When
displaying in absolute values, specify at 0.5 intervals in
a range from 50.0 to 99.5. When displaying in relative
values, specify at 0.5 dB intervals in a range from
–32 dB to +17.5 dB. If you do not want to set any
specific value, leave this item “Off,” the default setting.
This option can be set for Main B and Zone 2 as well as
for Main A.
d. Power On Volume
You can set a constant volume level of sounds output
when the RDC-7.1 is powered on. When displaying in
absolute values, specify at 0.5 intervals in a range from
0 to 100. When displaying in relative values, specify at
0.5 dB intervals in a range from –
∞
dB and –81.5 dB to
+18.0 dB (Max). If you want to maintain a selected
volume level setting when putting the apparatus into
standby status, select “Last.” This option can be set for
Main B and Zone 2 as well as for Main A.
a. Headphone Level
When the volume level differs between speakers and
headphones, you can, in advance, fine tune the
headphones volume. Adjust at 0.5 dB intervals in a
range from –12 dB to +12 dB.
This sub-menu appears when the video terminal board
[H] and [I] is inserted.
a. Component Video
Specify whether or not to display the On Screen Display
(OSD) on the screen, when both of the source device
and TV/projector are connected to the component video
terminals. This option can be set for both Main A and
Main B.
OSD On (Default):
OSD is displayed.
OSD Off:
OSD is not displayed.
b. Immediate Display
Specify whether or not to display the description of
operations on the screen while you are operating the
RDC-7.1 (when the component video signal is output,
nothing is displayed if set to On). This option can be set
for Main B and Zone 2 as well as for Main A.
On (Default):
Displayed.
Off:
Not displayed.
c. Display Position
Specify the position where the Immediate Display
should be displayed. You can set in a range of ten
positions from Top to Bottom of the screen. By default,
it is displayed at the Bottom of the screen. This option
can be set for Main B and Zone 2 as well as for Main A.
d. Scan Mode
Specify whether or not to output the video signal with
interlace mode.
Interlaced:
Outputs with interlace mode.
NonInterlaced:
Does not output with interlace mode.
e. Net-Tune OSD Display
This item appears when the ETHERNET terminal board
[B] (for Net Audio) is inserted.
Specify whether or not to display a description of
operations on the screen when using Net-Tune (when
the component video signal is output, nothing is
displayed if set to On). This option can be set for Main
B and Zone 2 as well as for Main A.
On (Default):
Displayed.
Off:
Not displayed.
This sub-menu allows you to adjust the position of the
OSD Setup Menu as it is displayed on your screen. This
sub-menu appears when the video terminal board [H]
and [I] is inserted. Depending on the monitor used,
there may be cases where the OSD Setup Menu is not
displayed in the center and parts of the menus are cut
off. To adjust the position of the OSD Setup Menu,
simply press the cursor buttons to inch the menu to the
position you desire. This option can be set for Main B
and Zone 2 as well as for Main A.
Volume Setup Sub-menu
Headphone Level Setup Sub-menu
OSD Setup Sub-menu
OSD Position Sub-menu
Содержание Integra Research RDC-7.1
Страница 1: ...AV Controller RDC 7 1 Instruction Manual...
