99
Setup Men
u
Input Setup
—Continued
SBL/SBR (7.1 ch) (Default):
Select this when using
the surround back channel.
Subwoofer Sensitivity
This item appears when the multichannel terminal board
[E] is inserted.
The following are also settings for “Multichannel 1” or
“Multichannel 2” (cannot be specified separately for
each input source).
Some DVD decks output the LFE channel at 15 dB
lower than the other channels in the multichannel
output.
The level setting under the Level Calibration sub-menu
is applied to the analog and digital inputs as well as the
multichannel input. Therefore, in this setting, you can
set the optimum LFE channel level applied only to the
multichannel input.
You can select from 0 (Default), +5, +10 and +15 dB.
Digital Audio
The following are settings for digital audio output.
Opt 1-Opt 6:
Select the device connected to “DIGITAL
IN OPTICAL 1-6.”
Coax 1-Coax 6:
Select the device connected to
“DIGITAL IN COAXIAL 1-6.”
AES/EBU:
Select the device connected to “DIGITAL
IN (BALANCED) AES/EBU.” The “AES/EBU” is
available when the board [E] equipped with AES/EBU
terminal is inserted.
No:
Select this when no device is connected.
Digital Format
For digital connections, you can set the digital signals to
be detected preferentially. When “Digital Audio” is set
to “No” on the Audio Assign Sub-menu above, this item
is not displayed.
Auto
: Automatically detects the format of input signals.
The signal format (Dolby Digital, DTS, PCM, AAC,
etc.) used for the selected source is automatically
detected, and necessary decoding is performed.
DTS:
Select for DTS decoding. You should select this if
you feel it takes too long to detect the signals when you
have selected “Auto,” or if you dislike noises caused by
CDs fast forwarding or rewinding.
If any sound other than DTS is input, there is no sound.
PCM:
Select for PCM decoding. You should select this
if you dislike omission of the top of a subsequent tune
when you have selected “Auto.”
If any sound other than PCM is input, there is no sound.
Note:
When playing any DTS-type CD or LD, always select
“Auto” and “DTS.” Selecting “PCM” will cause noises.
i.LINK
This item appears when the i.LINK(AUDIO) terminal
board [A] is inserted.
When you connect multiple devices using the
i.LINK(AUDIO) interface, the device names in the
i.LINK connection appear and you can choose the input
device from them using the cursor ([
]/[
]) buttons.
The device selected here will be the preferred device
among the connected i.LINK(AUDIO) devices.
No:
Select this when connected i.LINK(AUDIO)
devices are not selected as input devices.
This sub-menu appears when the ETHERNET terminal
board [B] (for Net Audio) is inserted.
Select Server
When input Music Server is selected from NET
AUDIO, you can specify a server to be connected (See
page 77).
The following are settings for video.
This sub-menu appears when the video terminal board [H]
and [I] is inserted.
Composite Video
1-6:
Select the device connected to the “VIDEO IN 1-
6” jack.
Last:
Select this when you want video signal from the
device you last selected to be output.
No:
Select this when no device is connected.
S-Video
1-6:
Select the device connected to the “S VIDEO IN 1-
6” jack.
Last:
Select this when you want video signal from the
device you last selected to be output.
No:
Select this when no device is connected.
Component Video
RCA 1-4:
Select the device connected to the
“COMPONENT VIDEO IN 1-4” jack. The “RCA 4” is
available when the video terminal board [J] contains the
RCA-type COMPONENT VIDEO IN 4 terminals.
BNC:
Select the device connected to the “COMPONENT
VIDEO IN” BNC type jack. The “BNC” is available
when the video terminal board [J] contains the BNC-type
COMPONENT VIDEO IN terminals.
Last:
Select this when you want video signal from the
device you last selected to be output.
No:
Select this when no device is connected.
HDMI
This item appears when the HDMI terminal board [L] is
inserted.
1:
Select the device connected to the “HDMI IN 1”
jack. When selecting this, the video signal from the
HDMI IN 1 terminal will also be output to the HDMI
OUT terminal.
Music Server Sub-menu (When input
is NET AUDIO)
Video Assign Sub-menu
Содержание Integra Research RDC-7.1
Страница 1: ...AV Controller RDC 7 1 Instruction Manual...
