Integra Integra Research RDC-7.1, Инструкция по эксплуатации

Страница: 38 / 156

38
Connecting AV Components —Continued
• When connecting a CD player to the RDC-7.1, make connections using digital or analog terminals. Before making
connections, refer to pages 30, 31 for correct connections. This section shows the connection example when you use
the default audio input assignment settings. However, when you use coaxial cables for digital audio signals, connect
the CD player to any terminal between the AUDIO IN DIGITAL COAXIAL 1 and 6, and remember to configure the
audio input assignment settings in the Audio Assign sub-menu (See page 98).
• When connecting a turntable, use the PH terminal. The PH terminal on the RDC-7.1 is designed for turntables that
use a moving magnet (MM) cartridge. When you want to use a turntable with a moving coil (MC) cartridge, connect
the turntable through a step-up transformer or head amplifier.
• If you assign other terminals to the PHONO input source, you need to configure the audio input assignment settings
in the Audio Assign sub-menu (See page 98).
• When a turntable is equipped with a ground wire, connect the wire to the GND terminal on the RDC-7.1. However,
some turntables may produce noise when the ground wire is connected to the RDC-7.1. In such a case, you do not
have to connect the ground wire.
• When you want to perform analog recording of the audio signal or operate your -compatible IntegraRESEARCH
products via connections with the RDC-7.1, you have to make analog audio signal connections. Connect the
audio output terminals on the source device to the AUDIO IN terminals on the RDC-7.1 using analog audio cables
(RCA/phono).
Connecting a CD Player, Turntable or Tuner
“Net-Tune”
is a trademark of
Onkyo Corporation.
4 4
3 3
2 2
1 1
C D DIGITAL IN DIGITAL IN
OPTICAL COAXIAL
SBR SBL
SR SL
SUB C
FR
FL
E MULTI
- CH
IN 1
AUDIO IN
2
1
PH
7
6
5
4
L R R L
GND
L R
F G L
HD
is
or
tra
Lic
S VIDEO VIDEO
IN IN IN 1
IN 2
3
2
1 Y
P
B
P R
COMPONENT
VIDEO
IN 3
I H
4 Y
OUT 1
J
OUT
Y
P
B
P R
COMPONENT VIDEO
IN (HD/BNC)
K
ANTENNA
FM
75
A B
R L
ANALOG
DIGITAL
OPTICAL
AUDIO OUT AUDIO OUT
GND GND
When connecting to other audio terminals
within the same terminal section, configure
the audio input settings accordingly using the
Audio Assign sub-menu (See page 98).
CD Player
Turntable