110
Listening Mode Setup
—Continued
f. Front Speaker
This option configures the front speakers to use when
playing the source in the Dolby Digital listening mode.
Select the speakers you want to use. This setting can be
made when the “(Speaker B) Front L/R” is set to “Main
A” in the Speaker Configuration sub-menu.
A (Default):
Outputs the source from the front speakers
configured to “Speaker A.”
B:
Outputs the source from the front speakers
configured to “Speaker B.”
A+B:
Outputs the source from the front speakers
configured to “Speaker A” and “Speaker B.” Note that
this option is not available when the front speakers are
in Bi-amp configuration.
g. Center Speaker
This option configures the center speaker to use when
playing the source in the Dolby Digital listening mode.
Select the speaker you want to use. This setting can be
made when the “(Speaker B) Center” is set to “Main A”
in the Speaker Configuration sub-menu.
A (Default):
Outputs the source from the center speaker
configured to “Speaker A.”
B:
Outputs the source from the center speaker
configured to “Speaker B.”
A+B:
Outputs the source from the center speakers
configured to “Speaker A” and “Speaker B.”
h. Surr L/R Sp
This option configures the surround speakers to use
when playing the source in the Dolby Digital listening
mode. Select the speakers you want to use. This setting
can be made when the “(Speaker B) Surr L/R” is set to
“Main A” in the Speaker Configuration sub-menu.
A (Default):
Outputs the source from the surround
speakers configured to “Speaker A.”
B:
Outputs the source from the surround speakers
configured to “Speaker B.”
A+B:
Outputs the source from the surround speakers
configured to “Speaker A” and “Speaker B.”
i. Surr Bk Speaker
This option configures the surround back speakers to
use when playing the source in the Dolby Digital
listening mode. Select the speakers you want to use.
This setting can be made when the “(Speaker B) Surr
Back” is set to “Main A” in the Speaker Configuration
sub-menu. However, when the “(Speaker A) Surr Back”
is set to “Bi-Amp for Front” or “Not Used,” this setting
will not be displayed.
• When the settings for “(Speaker A) Surr Back” and
“(Speaker B) Surr Back” in the Speaker
Configuration sub-menu differ, the available options
will be “A” and “B.”
A (Default):
Outputs the source from the surround back
speakers configured to “Speaker A.”
B:
Outputs the source from the surround back speakers
configured to “Speaker B.”
A+B:
Outputs the source from the surround back
speakers configured to “Speaker A” and “Speaker B.”
j. Subwoofer
This option configures the subwoofer to use when
playing the source in the Dolby Digital listening mode.
Select the terminal to which the subwoofer you want to
use is connected. This setting can be made when the
“(Speaker A) Subwoofer” is set to an option other than
“Not Used” in the Speaker Configuration sub-menu.
However, when the “(Speaker B) Subwoofer” is set to
an option other than “Main A” in the Speaker
Configuration sub-menu, the available options will be
“A” or “Not Used.”
A (Default):
Outputs the source only from the
subwoofer connected to the SUBWOOFER PRE OUT
A terminal.
B:
Outputs the source only from the subwoofer
connected to the SUBWOOFER PRE OUT B terminal.
A+B:
Outputs the source from the subwoofers
connected to the SUBWOOFER PRE OUT A and
SUBWOOFER PRE OUT B terminals.
Not Used:
No subwoofers are used for playback.
This sub-menu allows you to configure the audio effect
and playback options when you play a source in the
DTS listening mode.
a. LFE Level
This option allows you to set the bass level for the DTS
listening mode. The LFE level setting made here will be
applied to all of the DTS input signals. The available
settings are –
∞
dB, –20 dB, –10 dB, and 0 dB. The
option defaults to “0.” This option can also be set for
Zone 2.
b. SB Mode (5ch)
This option allows you to select the enhancement mode
for playback when you play a 5.1ch source as a 6.1 or
higher channel source through the RDC-7.1. The
surround back setting you select here will be applied to
the DTS input signal “*/2.”
• When the “(Speaker A) Surr Back” is set to “Bi-Amp
for Front” or “Not Used” in the Speaker Configuration
sub-menu, this option will not be displayed.
NEO:6:
Plays a 5.1ch source as a 6.1 or higher channel
source using the DTS NEO:6 mode.
Dolby EX:
Plays a 5.1ch source as a 6.1 or higher
channel source using the Dolby Digital EX mode.
PLIIx Movie:
Plays a 5.1ch source as a 6.1 or higher
channel source using the Dolby Pro Logic IIx Movie
mode.
DTS Setup Sub-menu
Содержание Integra Research RDC-7.1
Страница 1: ...AV Controller RDC 7 1 Instruction Manual...
